C 2135 • 200mm (8″) 5W 100V Black EWIS One-Shot Ceiling Speaker

A low profile 5W 200mm (8") PA speaker featuring a high performance twin cone driver. This standard model utilises the C 2112C PA driver and is suitable for EWIS systems.

SKU: C 2135 Categories: ,
Overview

This 200mm (8″) One-Shot Redback PA ceiling speaker has been engineered to be EWIS compatible and offer fast installation. They are ideal for BGM, paging & emergency warning applications. The offset transformer mounting allows mounting in ceilings with limited recess space. Fitted with twin cone 200mm driver with 4 way wire protect terminal block & 22uf bipolar cap.

 Key Features:

  • Excellent speech intelligibility.
  • Engineered to meet Australian Standard AS1670.4
  • High quality speaker driver developed for BGM, paging and emergency warning applications.
  • Patented 6 way latching ensures a neat, sag free installation.
  • Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
  • Fitted with cable restraint plate and transformer safety cover as required by Australian Standards.
  • Fitted with supervisory capacitor for line monitoring.
  • High impact styrene grille.
  • Australian designed & assembled.
  • 5 year warranty.

 

The Labour Saving One-Shot® Mounting System

Redback® “One-Shot®” speaker units install in seconds providing substantial labour cost savings for the professional installer compared to traditional mounting methods. They simply snap fit to the ceiling by means of the integral pressure clips. The snap clip material is formulated to retain long service life strength and spring action, ensuring a firm vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings. 

 



5-year-warrantyBacked by an industry leading 5 Year Speaker Performance Warranty.
This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.

Specifications
Power taps: 0.33, 0.66, 1.25, 2.5, 5W
Frequency Response: 75Hz- 15kHz
SPL (1W @ 1M): 93dB
Size: 200mm
Hole Cutout (Ø): 246mm
Connection: 4 way terminal block + 22uf bipolar capacitor
Note: All SPL figures are measured at 1KHz +/- 2dB.
Order Enquiry









Documents