CF0705 • 100mm 5W 100V Surface Mount Fire Speaker AS ISO7240.24
A surface mount fire speaker featuring flame retardent housing material and PA driver to suit the new approval requirements. Requires no external equalisation to meet the AS ISO 7240.24:2018 standard. One-Shot design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably.
Key Features:
- Designed to meet AS ISO7240.24:2018 standard for fire & evacuation warning systems.
- Requires no external EQ for AS ISO7240.24:2018 fire systems.
- Excellent speech intelligibility.
- High quality speaker driver developed for BGM, paging and emergency warning applications.
- Patented 2 way latching system reduces installation time.
- Fitted with 4 way wire protect terminal block for loop in, loop out wiring as required by Australian Standards.
- Fitted with supervisory capacitor for line monitoring.
- High impact enclosure & grille.
- Australian designed & assembled.
- 5 year warranty.
The Labour Saving One-Shot® Mounting System
Redback® “One-Shot®” speaker units install in seconds providing substantial labour cost savings for the professional installer compared to traditional mounting methods. They simply snap fit to the outer mounting ring by means of the integral pressure clips. The snap clip material is formulated to retain long service life strength and spring action, ensuring a firm vibration free fit. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). The neutral white RAL colour provides an architecturally unobtrusive finish to virtually any installation. The transformer is fitted with a 4 way wire protect screw terminal block. This is suitable for loop in, loop out cabling.
Activ-Fire listed product.
This speaker has been tested and certified by the CSIRO under the active fire protection product certification scheme. This is a register of approved dire protection equipment used in fire evacuation systems.
Backed by an industry leading 5 Year Speaker Performance Warranty.
This speaker is covered by our 5 Year speaker performance warranty. Redback PA drivers are engineered and manufactured to stringent specifications ensuring maximum reliability under all operating conditions. Each driver has a power rating well above the max tapping of the transformer, ensuring reliable operation and excellent longevity.
Rated Noise Power: 5 Watts (100V line)
100V Power Taps & Impedance: 0.33W (30kΩ),0.66W (15kΩ), 1.25W (8kΩ), 2.5W (4kΩ), 5W (2kΩ)
Sensitivity: 91dB (1W @ 1m), 79dB (1W @ 4m)
Maximum Sound Pressure Level: 97dB (5W @ 1m), 85dB (5W @ 4m)
Frequency Response: 100Hz – 15kHz
Coverage Angle (-6dB): 500Hz: >180°, 1000Hz: 155°,2000Hz: 120°, 4000Hz: 80°
Environmental Type: A (for indoor applications as per standard)
Line Monitoring: Yes, 22μF bipolar capacitor
Applicable Cable: 2.5mm2 (14AWG) max conductor area
Connection: 4 way screw terminal
Mechanical
Speaker Component: 100mm (4”) paper cone speaker
Material: Flame retardant ABS grille and housing (Taitalac 8540T),Clear Flame retardant ABS spring clips (Makrolon 6557)
Mounting Method: Surface Attachment
IP Rating: IP 21C
Dimensions: 280Ø x 80mm
Weight: 0.9kg