C 8860B • Auto-Scan UHF Wireless Mic Receiver 16 Ch 520-550MHz
Auto-Scanning UHF wireless system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby. A range up to 100m is possible in ideal conditions.
Auto-Scanning UHF wireless system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby. A range up to 100m is possible in ideal conditions. Incorporates diversity reception ensuring a consistent and clear microphone signal with minimal dropout and noise interference. 16 channels allow interference free operation with multiple systems in the one location. Noise reduction system automatically compensates for high level sound inputs thus avoiding distortion. Channel and volume settings are adjusted via front panel. Output is via 3 pin XLR balanced or 6.35mm unbalanced. LEDs are provided for displaying system status. The system operates from 12-18V dc (power supply included). The C 8864B transmitter is compatible with a wide range of microphones. It also features an instrument level capability for connecting a guitar using the C 8909 lead.
Rack Mounting
To mount a single receiver into a rack, use C 8889 rack mounting ears. To mount two receivers side by side in 1RU of rack space, use the hardware included with the C 8860B.
Key Features:
- 16 channels in the 520-550MHz UHF band
- RF and AF signal presence indicator LEDs
- Tone squelch circuit for noise reduction
- Range of up to 100m in ideal conditions
- 6.35mm unbalanced line/mic output
- 3 pin balanced XLR mic output
Carrier frequency range: 520 – 550MHz UHF band
Frequency stability: ±0.005%
Oscillator: PLL Synthesised
Receiving sensitivity: 10µV over 80dB S/N ratio
Image and spurious rejection: 80dB minimum
Selectivity: >50dB
Modulation mode: FM
IF Frequency: 1st: 243.95MHz, 2nd: 10.7MHz
Tone signal: 32.768kHz
Signal to noise ratio: >94dB, at 20kHz deviation and
60dBµV antenna input
Audio frequency response: 80Hz to 16kHz
Total harmonic distortion: less than 1.0% (at 1kHz)
Audio output: Balanced and unbalanced outputs for single channel
Switching diversity (Mic = 20dB / Line = 0dB)
Power supply: 12V dc
Current consumption: 200mA (max)
Dimensions: 210W x 165D x 44H mm
Transmitter
Carrier frequency range: 520 – 550MHz UHF band
RF Power output: 10mW (max)
Oscillation mode: PLL Synthesised, 16 Channel selectable
Frequency stability: ±0.005%
Maximum deviation: 20kHz with limiting compressor
Spurious emission: >50dB below carrier frequency
Total harmonic distortion: <1% (at 1kHz)
Microphone capsule
Handheld: Uni-directional electret condenser unit
Beltpack: Sold separately
Battery: 3V dc (2 x 1.5V AA batteries) or
2.4V dc (2 x 1.2V AA rechargeable)
Current consumption: 120mA ±10mA
C 8864B • Wireless UHF Beltpack 16 Ch 520-550MHz
A 16 channel wireless UHF beltpack transmitter designed for use with the C 8860B Auto Scan Receiver system. It features a 520-550MHz transmitter.
C 8862B • Wireless Electret UHF Mic Handheld 16 Ch 520-550MHz
A handheld 16 channel wireless UHF microphone designed for use with the C 8860B Auto Scan Receiver system. It features a 520-550MHz transmitter.