C 8864B • Wireless UHF Beltpack 16 Ch 520-550MHz
A 16 channel wireless UHF beltpack transmitter designed for use with the C 8860B Auto Scan Receiver system. It features a 520-550MHz transmitter.
Overview
A 16 channel wireless UHF beltpack transmitter designed for use with the C 8860B Auto Scan Receiver system. It features a 520-550MHz transmitter.
Key Features
- Compact & lightweight
- Fitted with 3 pin mini XLR microphone
- On / Off / Mute switch
- Gain control
- Switchable impedance between mic & instrument pickup
- Requires 2 x AA batteries (either alkaline or rechargeable).
Specifications
Transmitter
Carrier frequency range: 520 – 550MHz UHF band
RF Power output: 10mW (max)
Oscillation mode: PLL Synthesised, 16 Channel selectable
Frequency stability: ±0.005%
Maximum deviation: 20kHz with limiting compressor
Spurious emission: >50dB below carrier frequency
Total harmonic distortion: <1% (at 1kHz)
Microphone capsule: None (microphones sold separately)
Battery: 3V dc (2 x 1.5V AA batteries) or 2.4V dc (2 x 1.2V AA rechargeable)
Current consumption: 120mA ±10mA
Carrier frequency range: 520 – 550MHz UHF band
RF Power output: 10mW (max)
Oscillation mode: PLL Synthesised, 16 Channel selectable
Frequency stability: ±0.005%
Maximum deviation: 20kHz with limiting compressor
Spurious emission: >50dB below carrier frequency
Total harmonic distortion: <1% (at 1kHz)
Microphone capsule: None (microphones sold separately)
Battery: 3V dc (2 x 1.5V AA batteries) or 2.4V dc (2 x 1.2V AA rechargeable)
Current consumption: 120mA ±10mA
Order Enquiry
Documents
C 8860B • Auto-Scan UHF Wireless Mic Receiver 16 Ch 520-550MHz
Auto-Scanning UHF wireless system allowing quick and easy selection of an interference free operating frequency. This is particularly useful when there are many existing systems in use nearby. A range up to 100m is possible in ideal conditions.
C 8907 • Lapel Electret Microphone For UHF Beltpacks
A miniature electret lapel microphone with lapel clip. Ideal for use with wireless beltpacks etc. Fitted with 3 pin mini XLR connection. Requires phantom power.