C 0361 • Phantom Powered Electret Shotgun Microphone
A phantom powered shotgun pickup microphone fitted with a 3 pin XLR male connector for direct connection to a desk mount socket.
Overview
This shotgun mic is designed to plug directly into a desk mount XLR socket. The line + gradient pattern provides an extremely tight unidirectional pickup and high rejection of back & side signals. It features a section of flexible gooseneck for angle adjustment. Phantom powered by 9 – 52VDC.
Key Features:
- Flexible gooseneck centre.
- Can be mated with 3 pin XLR base such as C 0431, C 0480 or C 0482.
- Balanced 3 pin XLR male connection.
- Excellent vocal reproduction.
Specifications
Insert: BackElectret – Condenser
Polar Pattern: Line + Gradient
Impedance: 200 Ohm balanced
Open Circuit Sensitivity: -60dB ±3dB
Frequency response: 30Hz – 18kHz
Maximum SPL: 119dB (1kHz @ 1% THD)
Dynamic Range: 89dB (1kHz at 1Pa)
Signal to Noise: 64dB (1kHz @ 1Pa)
Operating Voltage: Phantom power 9V – 52V DC, 2mA typical
Output Connector: Integral 3-pin XLR Male
Dimensions: Ø19 x 288mm
Included Accessories: Windscreen
Polar Pattern: Line + Gradient
Impedance: 200 Ohm balanced
Open Circuit Sensitivity: -60dB ±3dB
Frequency response: 30Hz – 18kHz
Maximum SPL: 119dB (1kHz @ 1% THD)
Dynamic Range: 89dB (1kHz at 1Pa)
Signal to Noise: 64dB (1kHz @ 1Pa)
Operating Voltage: Phantom power 9V – 52V DC, 2mA typical
Output Connector: Integral 3-pin XLR Male
Dimensions: Ø19 x 288mm
Included Accessories: Windscreen
Order Enquiry
Documents