Amplifiers
A 4043 • Phase5 60W 3 Input 100V Public Address Amplifier
A 3 input 60W 100V line output PA amplifier designed for medium sized background audio and paging announcement installations. Compatible with A4573 alert/evac/chime board and remote digital volume control (with A 4373).
A 4037 • Phase5 40W 3 Input 100V Public Address Amplifier
A 3 input 40W 100V line output PA amplifier designed for medium sized background audio and paging announcement installations. Compatible with A4573 alert/evac/chime board and remote digital volume control (with A 4373).
A 4205 • 3VA Kiosk Hearing Induction Loop Amplifier
This compact hearing loop amplifier is designed for use in information kiosks, ticketing booths, help desks etc. Anywhere a small loop system is required to aid the hearing impaired.
A 1922 • Amplifier Module 60W
These modules are designed for use in emergency evacuation systems and are powered by an external 24V DC source. They accept a line level audio input and produce a 100V line output via a transformer.
A 1932A • Amplifier Module 120W
These modules are designed for use in emergency evacuation systems and are powered by an external 24V DC source. They accept a line level audio input and produce a 100V line output via a transformer.
A 1937 • Amplifier Module 250W
These modules are designed for use in emergency evacuation systems and are powered by an external 24V DC source. They accept a line level audio input and produce a 100V line output via a transformer.
A 4017 • 15W Public Address Amplifier
Super compact with surprising performance specifications, intended for smaller PA system applications. Our engineering team based the design around a National TDA1519 monolithic IC achieving virtually “destruction proof” operation under quite severe misuse such as over temperature, over voltage, over load and short circuit speaker line conditions.
A 4116 • 15W 8 Ohm Stereo Public Address Amplifier
This super compact stereo amp is ideally suited to classrooms, boardrooms, boutiques, reception areas or anywhere a small functional stereo system is required. Offering outstanding stereo performance and featuring both stereo RCA aux and a 3.5mm front panel input, plus a 3.5mm headphone jack.
A 4212 • 280VA Hearing Induction Loop Amplifier
280VA model delivers 8A RMS, 11A peak and is suitable for areas of approximately 650m2. Hearing induction loop amplifiers are installed to greatly enhance the listening experience of people using hearing aids.
A 4210 • 80VA Hearing Induction Loop Amplifier
80VA model delivers 3.5A RMS, 5A peak and is suitable for areas of approximately 180 square metres. Hearing induction loop amplifiers are installed to greatly enhance the listening experience of people using hearing aids.
Q 2012 • Handheld Current Loop Tester
Essential for setting up and commissioning hearing induction loop amplifier systems. This unit is ideally used in conjunction with the Q 2014 tone generator allowing an installer to test the signal generated in the actual ‘loop’ of the system.
Q 2014 • Handheld Audio Generator
Compact and portable, this handheld battery powered 1KHz tone generator has been designed to test PA systems and in particular hearing loop induction sound systems.