Fire & Evacuation
A 4574A • Alert/Evac/Chime Tone Generator
This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency
A 4567C • Line Monitoring Unit 10 Zone
Specifically designed to monitor the condition of 100V line speaker systems in emergency paging and fire evacuation installations. Many large commercial installations have speaker circuits in excess of 250W. Traditional line monitoring units were limited to 50W per zone and would not handle this load. The A 4567C can handle loads up to 500W per zone.
S 4457 • 100V Line Evac Override Relay Box
Designed primarily for PA speaker line installations with two PA systems active in a building. Useful for applications where a dedicated evac speaker system is running along side a dedicated background music system. This box allows the background music to be disconnected when the evac system is active. It can also be used to switch between two different PA systems with only one output speaker line. Requires 24V DC power source (sold separately).
A 4595A • Lockdown Warning Evacuation Controller
This lockdown controller complements the A 4565 alert/evac controller and is primarily aimed at schools which require a lockdown warning facility. The controller has provision for a period bell plus a standby, lockdown and all clear tones.
A 4579 • Remote Isolate Timer Wallplate
This wallplate has been designed to be used with the A 4500B Timer and A 4505B Lockdown Timer to allows remote activation of the Isolate function of the timers. A simple Connection is made via Cat5e cable. Supplied with two covers to suit existing decor
A 2064 • Lockdown / Fire / Cancel Remote Wall Plate
This wallplate has been designed to remotely trigger A4505B. Featuring Lockdown, Fire and Cancel buttons with protective “flip up” covers to prevent accidental operation. Connects to main unit via a minimum 7 core cable. All connections via screw terminals for easy on-site termination. Switches are momentary operation. Supplied with two covers to suit existing decor.
A 4565B • Emergency Alert & Evacuation Controller
This easy to operate fire & evacuation controller is designed around industry standard building emergency alert/evacuate requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency eg: fire, gas leak, bomb scare, earthquake.
A 4505C • 7 Day Timer With Lockdown & Fire Alarm Control
A weekly timer and Lockdown and Fire Alarm controller all housed in a convenient 1RU rack mount chassis. A total of 50 “event” switching times are available through the timing functions. Each event can be set to turn on any single day of the week or on multiple days, from 1 sec up to 24 hours.
A 2069 • Remote Lockdown Wallplate for A 4505B
The Redback® A 2069 Remote Plate allows the Redback® A 4505B Lockdown Timer to be controlled remotely. Featuring Lockdown, Fire, Chime and Cancel buttons.
A 4512 • 12A 24V Battery Charger Sealed Lead Acid (SLA)
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switchmode battery charger ensuring optimum battery charging and performance. 12A current output with 24V charging.
A 4506 • 6A 24V Battery Charger Sealed Lead Acid (SLA)
Ideal for PA systems & other applications requiring battery backup. This all new model incorporates a highly efficient, intelligent, multi stage switch mode battery charger ensuring optimum battery charging and performance. 6A current output with 24V charging.
A 4574A • Emergency Alert & Evacuation Tone Generator
This half rack unit has both Alert and Evacuation tones based on Australian standard. The unit is triggered via standard alert/evac switches on the front of the unit or via remote trigger contacts on the rear.