Mixers & Signal Processing
A 4944 • RCA To Cat5 UTP Extender (Transmitter)
The Redback A 4944 provides a convenient way to send line level RCA audio signals over long distances via Cat5/6 cabling. The unit has DIP switch selectable input sensitivities of 100mV and 1V to handle inputs of varying levels.
A 4937 • 3 Input XLR Mic/Line Pre-Amplifier Bluetooth Wallplate
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. This model also features bluetooth audio streaming for local zone playback of music.
A 4935 • 3 Input XLR Mic/Line Pre-Amplifier Wallplate
These local zone input wallplates allow for multiple mic/line inputs to be sent over UTP cabling back to a single UTP receiver for connection to a zone amplifier. It also connects to the Redback A 4480B directly allowing multiple microphones to be connected to a single zone input. All audio inputs are mixed with individual level controls.
A 4941 • 3 Pin XLR Transmitter Wallplate
This 3 pin XLR UTP transmitter wallplate sends signals to compatible Redback UTP solutions receivers. It converts a balanced XLR signal to an RJ45 connection suitable for transmission over Cat5/6 UTP cabling.
A 4953 • 5 Pin XLR Transmitter Wallplate
This 5 pin XLR UTP transmitter sends signals to compatible Redback UTP solutions receivers and converts the signal to a balanced XLR output with PTT connection.
A 4954 • 5 Pin XLR Cat5 Extender (Receiver)
This 5 pin XLR UTP receiver accepts signals from compatible Redback UTP solutions transmitters and converts the signal to a balanced XLR output with PTT connection. Connects to a suite of Redback UTP products.
A 4952 • 5 Pin XLR Cat5 UTP Extender (Transmitter)
This 5 pin XLR UTP transmitter sends signals to compatible Redback UTP solutions receivers. It converts a balanced XLR signal with PTT to an RJ45 connection suitable for transmission over Cat5/6 UTP cabling. Connects to a suite of Redback UTP products.
A 4940 • 3 Pin XLR Cat5 UTP Extender (Transmitter)
This handy interface box provides a convenient way to send low level audio signals over long distances via Cat5/6 cabling. The unit has adjustable input sensitivities to handle either microphone (3mV) or line levels (1V) and has provision for phantom power (15V DC).
A 4942 • 3 Pin XLR Cat5 UTP Extender (Receiver)
This handy interface box receives audio from compatible Redback Cat5e/6 transmitters and converts the signal to a balanced XLR output. The output level is DIP switch selectable, and the output volume is screwdriver adjusted via the trimpot on the front of the unit.
A 4411 • 4 Channel Public Address Stereo Mixer
This 4 Channel Stereo Mixer has been designed to meet the growing demands of PA systems utilising high power stereo amplifiers, it features 2 balanced microphone and 2 auxiliary inputs. Perfect for aerobics use, bars, bistros, sporting clubs. Two sets of tone controls are provided; one for the microphone inputs and one for the auxiliary inputs. Master volume is provided on the rear panel.
A 5138 • Microphone Wallplate to suit A 5135 Microphone Hub
The A 5138 Wall plate has a standard 5 Pin XLR connector for connection of microphones with PTT switches. This connection is ideal for typical supermarket microphones such as Altronics C 0325 or C 0327 as shown below. The low output level of the microphone is converted to a high level output which is fed down the Cat5 cable to the A 5135. The output level can be adjusted by the volume control.
A 5135 • 4 Output Microphone Hub
This model has been designed with small supermarkets in mind. We’ve designed the hub to cater for industry standard supermarket 5 pin XLR microphones which connects to a local wallplate (A 5138) over Cat5/6 cable. This greatly simplifies the install cabling process for multiple microphone systems. Up to four microphones can be connected to one hub with each input configurable to either VOX or PTT muting. Three levels of priority are provided: FIBD, 1 over 2-4, 2 over 3-4, 3 over 4 or mixed options. System busy LED’s are included on each wallplate.